Factory a Nocera Umbra (PG) | 249667

Portion of industrial property in Nocera Umbra (PG) - LOT 3

Notice
n.23668.4

Description

BIDDING COLLECTION - Portion of industrial property in Nocera Umbra (PG), SP271 - LOT 3

The property is listed in the Building Registry of the Municipality of Nocera Umbra at Sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - R.C. € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 rooms - R.C. € 325.37

The lands are listed in the Land Registry of the Municipality of Nocera Umbra at:
Sheet 18 - Parcels 1012 - 1014 - 1015 - 1018 - 1019 - 1020 - 1023 - 1024 - 1027 - 569 - 350 -352

The portion of the property in question is part of the larger industrial complex described below:

Industrial property located in the immediate vicinity of the fast-flowing road in the Flaminia Variant (ex .SSn°3), 2 km away from the Colle-Gaifana junction.
The building was constructed in various stages starting from 1982 until the latest expansion in 2002.
The construction system consists of cast in situ concrete for the elevation part, while the roof was made with shed type concrete roof tiles.
The infill walls are made of block masonry in cast in situ concrete, with metal and polycarbonate fixtures above, some of which are sliding; there is an industrial type flooring in all areas except for the Offices which were made of marble.

The complex is equipped with all the necessary technological and supply infrastructures, both for the production cycle and for human presence.
There are fire compartmentalizations and other protection and prevention devices to provide the necessary safety for employees; the same applies to wastewater drains, emissions, etc.
In detail, the structure was set up with discontinuous foundations, a plinth cast in situ connected to the ground by drilled piles (diameter 80cm) cast in situ, interconnected with cast in situ concrete connecting beams. The regular mesh piers are articulated uniformly, with dimensions of 60 cm by 110 cm and a height of 8 meters, on which double T beams are placed to support the prefabricated roof; these horizontal elements
are 200 cm high, limiting the internal height to 7.50 meters from the underside of the beam to the finished floor.
While the part created in orthogonal spans, from the extrados to the intrados of the same, constitutes the Technical Volume intended to accommodate various 25-ton overhead cranes.
The roof is made of pre-stressed precast reinforced concrete elements type HPV resting on -Saddles- in cast in situ concrete by hinge connection.

Sub 7 represents the caretaker's/porter's house which will be co-owned with the remaining portions of the industrial property.

For further information, please refer to the expertise and documentation attached.

The collection will be carried out using the following methods:

All potential bidders, except for those legally not allowed to participate in the sale, after registering on the website www.gobidreal.it, must fill out the participation form (published online) and send it back signed, to accept the proposed conditions, to the following address f54.2020ancona@pecfallimenti.it along with the required documentation.

For more information regarding participation, please consult the Sales Notice and the specific sales conditions.

Area: 15.187 sqm

Sqm Court: 8231 sqm

Caretaker home: 219 sqm

Lot Code: 3

close Show more