Italiano
English
Français
Español
Euskara
Català
Deutsch
Nederlands
Português
Shqiptare
Български
Čeština
Ελληνικά
Hrvatski
Magyar
Македонски
Polski
Română
Српски
Slovenský
Slovenščina
Türkçe
Русский
Dansk
Suomalainen
Íslenskur
Norsk
Svenska
Lombard
Marchigiano
Pugliese
Romano
Siciliano
Toscano
Veneto
The property is listed in the Building Registry of the Municipality of Nocera Umbra at Sheet 18:
Parcel 324 - Sub. 11 - Category D/01 - R.C. € 454,136.00
Parcel 324 - Sub. 7 - Category A/3 - Class 3 - Consistency 6 rooms - R.C. € 325.37
The portion of the property in question is part of the larger industrial complex described below:
Industrial property located in the immediate vicinity of the fast-flowing road on the Flaminia Variant (ex. SSn°3), 2 km away from the Colle-Gaifana junction.
The building was constructed in various stages starting from 1982 until the latest expansion in 2002.
The construction system consists of cast in situ concrete for the elevation part, while the roof was made with shed type tiles of c.a.p.
The infill walls were built with block masonry in cast in situ concrete, with metal and polycarbonate fixtures above, some of which are sliding; there is an industrial type flooring in all areas except for the Offices which were made of marble.
The complex is equipped with all the technological and supply infrastructures, necessary for both the production cycle and human presence.
There are REI compartments and other protection and prevention devices to provide the necessary safety for employees; the same applies to wastewater drains, emissions, etc.
In detail, the structure was set up with discontinuous foundations, a plinth cast in situ connected to the ground by drilled piles (diam.80cm) cast in situ, interconnected with connecting beams in cast in situ concrete. The regular mesh piers are articulated uniformly, with dimensions of 60 cm by 110 cm and a height of 8 meters, on which double T beams are placed to support the prefabricated roof; these horizontal elements
are 200 cm high, limiting the internal height to 7.50 meters from the soffit of the beam to the finished floor.
While the part obtained in orthogonal span, from the soffit to the soffit of the same, constitutes the Technical Volume intended for the accommodation of various 25-ton overhead cranes.
The roof is made of precast prestressed concrete elements type HPV resting on -Saddles- in c.a. connected by a hinge.
Sub 7 represents the caretaker's/porter's house which will be co-owned with the remaining portions of the industrial property.
For further information, please refer to the expertise and documentation attached.
The collection will be carried out using the following methods:
All potential bidders, except for those legally not allowed to participate in the sale, after registering on the website www.gobidreal.it, must fill out the participation form (published online) and send it back signed, to accept the proposed conditions, to the following address f54.2020ancona@pecfallimenti.it along with the required documentation.
For more information regarding participation, please consult the Sales Notice and the specific sales conditions.
Area: 13.631 sqm
Sqm Court: 9960 sqm
Offices: 869 Mq
Caretaker home: 219 sqm
Lot Code: 1
-in-via-Primo-Maggio_00002_lotto-gobid.JPG)
_00002_lotto-gobid.jpg)
-LOTTO-2_00018_lotto-gobid.jpg)
